Fastener and Fixings

The acorn cap nut is a hex nut with an internal dome and it is internally threaded. The dome feature offers protection of exposed screw threads and a decorative appearance as a finishing fastener. The cap nut also protects from injury by covering exposed threads. Can be used in hobby, furniture, fencing projects, lawn or playground equipment, or any other applications where nut is required.

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.  1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Threads: ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2"

Special Brass nuts machined nuts fasteners metric fasteners
We shall be pleased to develop Non-Standard Brass fasteners bolts nuts screws stud’s fixings wood screws machine screws fasteners as per specific requirements.

Sizes:

• 1/16, 1/8, 5/32, 3/16,¼, 5/16, 3/8,½,¾, 1 inch. M3, M4, M5, M6, M8, M10, m12, m16, UNC, UNEF, UNC, BSW. MM in thread size

Brass BSP Inserts NPT Inserts Brass Threaded Inserts for PVC/CPVC/UPVC molding of sewerage and pipe fittings.

Tappex Type Inserts Brass Molding Inserts Brass Inserts Plastic Molding inserts are used with plastics and soft woods. They are available with serrated grooves and are push fit type.

Thread:

 

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance.
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available:
• Diamond
• Straight
• Unidirectional

It is Used along with flat washers in order to avoid damage from its sharp edges and helps to increase the strength of the fastener.

Features:

• Impeccable Finish Sturdiness Perfect strength

Threads:

• M3, M4, M5, M6, M8, M10, m12, M16, M20, 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.  25mm, 32mm, 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance.
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available:
• Diamond
• Straight
• Unidirectional

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance.
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Diamond
• Straight
• Unidirectional
• Insert Moulding.

Features:

• Brass Anchors Anchoring System.
• Brass Spring Anchor, Brass Anchor fasteners, Brass Anchors Drop in anchors.
• Brass Plain Anchor, Brass drop in anchors.
• Brass Wood Anchors, Brass anchor bolts.
• Brass Anchor with Thread, Brass Anchor bolts.
• Brass Anchors Sizes are available as per customers drawing or sample.

 

This type of anchor is used in concrete wall for fastening purpose. Different sizes can be manufacture according to the customers requirement.

 

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.
  1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

 

Brass Machine Screws Fasteners Nut Cold Forged and Bar Turned Brass Fasteners Jamnagar

Type:

• Wood screw
• Knurled screws
• Slotted grub screw
• Chicago screw
• Hex set screw
• Round head screw
• Cheese head screw
• Pan head screws
• Csk screw
• Grub screw
• Raised csk head screw
• Book screws / Chicago screws
• Phillips head screw
• Combination head screw
• Cross head screw
• Special head screws
• Shocket head screws

Threads:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Features:

• Brass Bolts
• Brass Flush Bolts
• Brass Door Bolts
• Nut Bolts Nuts Hex Nuts
• Brass Carriage Bolts
• Square Nuts Panel, Nuts Welding & Nuts Weld Brass Nuts Cold Forged And Bar Turned Fasteners.

We are a unique entity in the industry, actively committed to offering an optimum quality range of Brass Eye Bolt.

These Cross Knurled Inserts Knurled Brass Inserts are double ended, so it helps to increased pull out and torque performance. They are self-aligning and hence aid installation process.

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available: Diamond, Straight, Unidirectional

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance.
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available: Diamond, Straight, Unidirectional

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Brass Wing Nut.

Features:

• Easy installation
• Resistance against corrosion
• Precisely designed

Thread:

ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.
 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2"

 

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available: Diamond, Straight, Unidirectional

We are among the reputed organizations, deeply engaged in offering an optimum quality range of Brass Hex Nut.

Special Features:

• Threads are as per International Go and Not Go Standards
• Deeply Grooved for maximum Pull Out Resistance
• Inner Diameter (I/D) after Threads with very close tolerance to prevent from unnecessary flush to enter into the inserts.
• Knurling Available: Diamond, Straight and Unidirectional

Thread:

• ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 11/8", 11/4", 11/2", 13/4", 2".

We are successfully meeting the varied needs of our patrons by offering a wide gamut of Brass Square Nut as per their precise needs.