Grounding Clamp

• Used to ground armored or unarmored wire to water pipe, Copper tubing and ground rod
• Armored Cable Adaptor Pre-Installed on Clamp
• The cast of High Strength High Conductivity Copper alloy
• Supplied with Steel Screws, Zinc Plated for corrosion resistance
• Standard Collar and Pressure Bar grips Cable Insulation to resist Pull-Out Force on Conductor
• Ground clamp provides maximum conductivity & strength

• Connecting Ground Conductors to Flat Bar with One or Two Conductors.
• Lay-In(Side Entry) Feature for Easy Installations.
• Use as Splice or Feed/Taps.
• The casting of Highly Strength of Higher Conductivity Bronze and Excellent Heat Dissipations.
• V Groove Aligns Conductor.
• Interlocking Design for Resistance to Vibrations.

• Connecting Grounding Conductors to I-Beam or other Metal Framings.
• Connecting 1 Grounding Wire to 1/4" Thick Bar and Stanchion.
• Popular for Fence Posts, Cable Tray and Structural Steels.
• Lay-In Features for use with Continuous Grounding Loop.
• The casting of High Strength and Highly Conductivity Copper Alloys.
• With Nuts, Stainless Steel Bolts and Lock Washer.

Parallel Lay-In Pipe clamp or Rebar Ground Clamps - Our Copper Alloy Parallel Lay-In Copper Grounding Clamps are suitable for Direct Burial in Earth and Concrete.
Ground Lay-In Rebar Clamps feature includes:

Used to Connecting Grounding Conductor Parallel to Water Pipe, Grounding Rod, Copper-Water Tubings or Rebars.

Lay-In Grounding Conductors are Parallel to Pipe or Rebar for easy wire installations.

The casting of High Strength Copper Alloys containing 80% or more Copper percentage.

It Provides Maximum Conductivity and Strength.

Supplied with Copper or Stainless Steel Screws

Suitable for Direct Burial in Earth & Concrete

We can also manufacture as per customer’s specification & design.
 

• Connecting Ground Electrode Conductors to Bare Rebars.
• Rugged & Compact
• Lay-In Features for Use on Continuous Grounding Loops.
• Stainless Steel nut and bolt.
• The casting of Highly Strength Conductivity Copper alloy
• For use of Copper Conductors only
• Not for use on Epoxy Coated Rebars.

• Grounding Jumper Clamp is for Splicing and Tapping Electrical Service Entrance Cable.
• Suitable for connecting with Galvanized Steel, Aluminum and Copper or Copper Bonded Steel Wires
• Bow Design Spring Action Maintains Positive Clamping Force
• The Casting of high strength and High Conductivity of Copper Alloy

• Transformer Grounding Connector is used to Grounding Transformer.
• Transformer Grounding Connector with 1/2"-13 Mounting Threads.
• Transformer Grounding Connector is Made from High Conductivity Copper Alloys.
• Available With Stainless Steel Nut and Lock Washers.