Grounding Clamps

Lay-In Connector For Copper Conductor - Lay-In Copper Conductor is best for the Grounding of Swimming Pools.

Lay-In Connector For Copper Conductors feature includes:

• The Lay-in Copper Lug is ideal for using on Grounding the Swimming Pools, For Jump to the Multiple Conduits and Conduit Bushings.

• Lay-in connectors are used on Conduit Grounding Bushings and for other Grounding Application.

• Open-faced Design allows the installer to quickly Lay-In the Grounding Conductor as a Jumper to Multiple Conduits with No Break in the Ground Conductor

• With Stainless Steel Screw

• For use with Copper Conductors Only

• The casting of High Strength of Copper alloys that containing 80% or more Copper.

We can also manufacture as per customer’s specification & design.

• Conductor Range: 14 - 4 AWG
• Screw Type: Slot
• Suitable for use with either Copper or Aluminum Conductor

Intersystems Bonding Connectors with Lay-In Features- These Intersystems Bonding Connectors accommodate all low voltage of servicing ground for bondings to the main grounding electrodes.

Intersystems Bonding Connectors feature includes:

• Fast & easy Installations on Grounding Conductors Below Meters.

• Lay-in Feature allowing Terminations to exist the Main Grounding Electrodes without Cutting or Splicing Conductors.

• Open-faced designs allowing the installers to quickly lay-in the groundings conductors as a jumper to multiple service grounds with no breaking in the ground conductors.

• 4 Bonding Positions are accommodating low volt utility service ground wire.

• Made of 6061-T6 Aluminum, Bronze.

• Assembles with Stainless Steel screws.

We can also manufacture as per customer’s specification & design.

• Designed to secure copper cable to flat studs, transformer spades, or copper bus 
• Equiped with silicon bronze hardware for corrosion resistance 
• Single wrench installation 
• Available in natural as well as Tin Plating

• For use with copper-bonded ground rods
• Suitable for 1/2″, 5/8″, and 3/4″ ground rods
• Made from high strenght Silicon Bronze 
• Conductor range - 10 SOL. - 2STR.
• Stainless Steel or Bronze Hex Bolts 

U Bolt Style Copper Ground Clamps 1 Conductor - This U Bolt Style Copper Ground Clamps 1 Conductor accommodates One Ground Electrode for bonding to Water Pipe or Fencing

U Bolt Style Copper Ground Clamps 1 Conductor features include:

• U Bolt Style Grounding Clamps

• Connect with Single Ground Wire Parallel or at Right Angle to Pipe, Copper Tubing, Ground Rod or Fencing

• Used with Continuously Grounding Loop.

• The casting of High Strength High Conductivity Copper/Bronze.

• Stainless Steel Bolts, Nut and Lock Washer.

We can also manufacture as per customer’s specification & design

Aluminum Lay-In Connector is For Copper and Aluminum Conductor

Aluminum Lay-In Connector For Copper/Aluminum Conductor feature includes:

• An Open face design allows the installers for quick lay-in the grounding conductors as a jumper to multiple conduits with no break in the grounding conductors.

• Aluminum lay-in conductor is designed for use in Conduit Grounding Bushing and other Grounding Application.

• Excellent connector for tapping off the main conductors without cutting due to lay in feature

• Manufactured from high strength 6061-T6 Aluminum alloy to ensure maximum strength & conductivity

• These conductors are Tin Plated to provide low contact resistance and protection from corrosion.

We can also manufacture as per customer’s specification & design.